How to Wrap a Badminton Racket with Step By Step Guide
You may think wrapping a racket is an easy task, but it’s not as easy as you think. It’s because most people make several mistakes while covering badminton. For example, when wrapping the badminton, the tape comes off from the handle over time because of less overlapping.
It will be dangerous because it creates challenges to grip the handle firmly. As a result, your triceps can be injured while hitting the shuttlecock. However, are you a beginner and don’t know how to wrap a badminton racket? You can get detailed information from here.
Things to Consider before Wrapping the Badminton Racket
Before wrapping your racket, you need to know about some essential tips that can help you. Many players seem to original factory grip is thin. For that reason, they want to wrap again after taking the badminton racket.
So, see below:
Select a Durable Wrapping Material
In the market, you can find numerous wrapping materials. But all of this material does not come with good quality. Don’t hurry, and choose reputable brand materials for wrapping. To remove your doubt, you can consult with your friends and choose a durable and high-quality material for you. When you are picking a material must see its comfort level. You can find three types of materials include woven, wrap, and fabric.
Follow Your Suitable Wrapping Process
It would help if you patterned clockwise, depending on your hand. Besides this, you need expert advice to start on the base of your handle.
Customize the Wrap to Your Needing
Consider the wrap type that you are using. It would help customize the styles to deliver an excellent hold after fixing the techniques.
How to Wrap a Badminton Racket: Step By Step Guide
Below we will give a stepwise guide about how to wrap a badminton racket. Let’s dig deep:
Step 1: Unfold the New Wrap Material
At first, eliminate the binding up sticker from the wrap material. Then straighten this wraps material to provide you with an exact time. Hence, you can see a brand name on this tape. Usually, please don’t lose it because after you will need it.
Step 2: Lay the Wrap at the Base of the Racket
Start from this base and raise the handle. Hold this racket toward facing behind you. In this way, you can stick out the handle before you.
Step 3: Eliminate the Plastic Seal
Generally, the badminton wrap comes with a plastic component that seals its sticky part. In this case, you should remove this plastic layer carefully. Otherwise, the wrap will not stick with each other.
Step 4: Identify the Sharp End of the Wrap
In most cases, the badminton racket cover comes with two different sides. One cover side is sharp, and the other is square. Hold the edges and also hold at an angle of the racket base.
In addition, in this way, it keeps its grip firmly. Yet, when you end the wrapping, you need to complete that with the type of the company’s name.
If you don’t like to use this company’s trademark tape, then hold it flat square rim at the /ith this pointed part, you can sharply finish this work.
Step 5: Wrap Overlap Adequately
When wrapping equipment on the badminton racket, you have to cover the next layer over the previous layers by some millimeters. After finishing the work, it can prevent the badminton racket from unraveling.
Nevertheless, now you need to check that you maintain the width of the overlap. By doing it, you can get a unique look.
Step 6: Keep the Wrap Tight
Typically, after spreading out the wrap element, you have to stretch it tightly. The low tension powerfully handles its hold. Otherwise, it begins to unfasten itself soon.
Step 7: At An Angle Cut The Wrap
Regardless, you need to off the wrapping after reaching the far end. Now, you need to cut the wrap at an angle so that behind the sharp end, it leaves. Continue the pointed tip the wrapping of the racket.
Step 8: End with the Sticker
Take the sticky tape that you have removed previously. Then put it on the above wrap where you have just ended the spreading. As well as offering the proper termination, it appears the brand name of this wrap.
Common Mistakes While Wrapping a Badminton Racket
People make a common mistake when wrapping a racket. Here is the error that people make:
Leaving Insufficient Overlap
Leaving out inadequate overlap is the most common mistake that players make. Therefore, these types of over-grip are likely to come off when you hope it. Most of the time, it happened during a tough match.
Wrapping Directly Above the Wooden Handle Directly
Don’t directly wrap over the wooden handle, and it’s advisable. It will sweat if you lay the grip above the wood, and hence over time, its quality will degrade.
Final Word
We hope you have realized how vital wrapping badminton is. It does not demand it’s necessary. In a word, you will be a master after trying a couple of times, so don’t worry. We hope you can win the match even when you add it with your appropriate racket string tension.
However, after reading this entire article, you get your answer about how to wrap a badminton racket. So, don’t think and try it with our detailed instructions. Best of luck!
